Skip to content
All MARKS USA Products

Marks USA 195SSRF/32D-SFIC Anti-Ligature Lever Storeroom Lockset, SFIC Prep Less Core, 2 3/4" Backset, ASA Strike, US32D Satin Stainless Steel

  • SKU: 195SSRF32D

Marks USA 195SSRF/32D-SFIC Anti-Ligature Lever Storeroom Lockset, SFIC Prep Less Core, 2 3/4" Backset, ASA Strike, US32D Satin Stainless Steel

  • SKU: 195SSRF32D
Sale priceDhs. 1,328.00/ea
In Stock
In Stock

The Marks USA 195SSRF/32D-SFIC is a Anti-Ligature Lever Lockset in Storeroom function, that is SFIC Prepped, is Less Core, has a 2 3/4" Backset, an ASA Strike, and comes in US32D Satin Stainless Steel finish.

  • ANSI-A156.2 Grade 1, UL listed 3 Hr. Fire Rating
  • Backset: 2 3/4” Standard, 2 3/8”, 3 3/4”, 5” Available
  • Latch #1834, stainless steel nose
  • Levers: Solid cast stainless steel. Levers Rotate up & down freely in locked or unlocked position
  • Levers recessed into solid stainless steel roses eliminating any open gap
  • Roses: Thru-bolted, spring loaded, #10 thru-bolts
  • Strike: #1135, 4 7/8” ASA curved lip strike
  • Door thickness: 1 3/4” +/- 1/16”
  • Stainless steel retractor

Storeroom Function - ANSI F86

  • Used for storage rooms, mechanical rooms, and electrical rooms where the outside lever should be locked at all times.
  • Key required for entry
  • Outside lever rigid at all times
  • Deadlocking Latch
  • Latch by lever inside or key outside
Manufacturer Marks
SKU 195SSRF/32D
Grade Grade 1
Installation Commercial
Origin USA
Unit of Measure Each
UL Listing Type UL 10C
ANSI Number A156.2
Restrictions None
BAA Qualified Yes
Limited Warranty Lifetime
Fire Rated 3 Hours {A}
Burglar Rated No
ADA Compliance No
Finish 630/US32D
Finish Description Satin Stainless Steel
Finish Family Matte Silver

 

Function F - Storeroom
ANSI Function F86
Lever/Knob Design 1955SS-Anti-Ligature Lever
Lever/Knob Design Family Anti-Ligature Lever
Rose/Escutcheon Design 3 13/16" Diameter
Cylinder Type SFIC Prep Less Core
Handing Non-Handed
Door Thickness 1 5/8" to 1 7/8"
Std. Latch Number 1834A
Std. Latch Type Dead Latch (Guarded)
Std. Latch Backset Dim 2-3/4"
Latch Bore Diameter 1"
Lock Face Size 2 1/4" x 1 1/8"
Bolt Projection 9/16"
Bore Hole Diameter 2 1/8"
Std. Strike Number 1135
Std. Strike Type ANSI Strike
Std. Strike Height 4 7/8"
Std. Strike Width 1 1/4"
Screws Combination
Product Type Cylindrical Lock

Recently viewed