Norton 6000 Series Low Energy Operators

Functions of Norton 6000 Series Low Energy Operators

Push and Go, Selector: The door opens fully as the operator senses movement.

Open/Close Obstruction Detection:

• Open: The door will stop and automatically reverse its movement if it encounters an obstruction while opening.
• Close: The door reopens if it encounters an obstruction while closing. If it encounters another obstruction while closing again, it will rest against the obstruction until cleared.

Motor Startup Delay Adjustment: Allows delay before the operator opens the door.

Vestibule Delay Adjustment: Provides time delay for vestibule applications.

Hold Open Delay Adjustment: Adjusts when the door remains open before closing.

Single Pole Double Throw (SPDT) Relay Output: Allows integration with external control systems.

SPDT Relay Output Time Adjustment: Adjusts time for SPDT relay output.

SPDT Alarm Output: Provides an alarm signal for system monitoring.

Blow Open for Smoke Ventilation: The operator supports smoke control applications, allowing doors to open for smoke ventilation.

Presence Detector Input: Interfaces with a presence detection system to activate the door.

Selector Mode Switch:

Off: Disables all signal inputs except for blow open.

On: Activates all signal inputs.

• Infinite Hold Open: The door can be held open indefinitely at a set position until the power is turned off.

Certifications

• ANSI/BHMA A156.19
• Americans with Disabilities Act (ADA) Compliant
• ETL tested to UL/cUL 325 standards for automatic operators
• Environmental Product Declaration (EPD)
• Health Product Declaration (HPD)
• UL 10C Positive Pressure up to 3 hours

Features of Norton 6000 Series Low Energy Operators

The following are the features of Norton 6000 series low energy operators:

• Push or Pull Side Mounting: These low-energy operators can be mounted on either the push or pull side of the door, providing flexibility for various installation configurations depending on the building's design and requirements.
• Non-Handed: The devices are non-handed and can be installed on left or right-handed doors without modification, reducing inventory requirements and simplifying installation.
• 1.3A Onboard Power Supply: These operators have a built-in 1.3A power supply, which offers sufficient power to run the operator and any connected devices, reducing the need for additional external power sources.
• Door Width: These devices are compatible with different door widths ranging from 36” to 48” offering flexibility for various door sizes commonly used in diverse commercial settings.
• Different Activation Methods: These low-energy operators are compatible with various activation methods, such as push buttons, hands-free sensors, and radio frequency (RF) devices, offering multiple options for easy and accessible door operation.
• Infinite Hold Open: These operators can keep the door open in a set position indefinitely until the power is turned off, which is ideal for applications requiring long periods of door access, such as hospital or warehouse settings.
• Maximum Door Size: These operators are designed to handle doors up to 4'0" x 8'0" in size and weigh up to 250 lbs, making them suitable for various commercial and institutional doors, including larger and heavier models.
• Buy Complete Door Hardware Set: Buy the Norton 565 Push Switch Kit along with the Norton 6311, 6331, and 6341 low-energy door operators to complete your door hardware set and give your commercial facility a modern and secure upgrade.